Supports
4x5 View Camera plate
ZP1
– a plate with an LED module for checking
parallelism of film/CCD standard-to-copy without disassembling the camera.
The plate contains a 4" square mirror, an LED module, and a
UR1 for holding the module. In a non-rigid copy system, such as
one that uses a view camera, the plate closely reproduces the weight
effect of a Better Light digital insert. The components of either ZV1
or ZV1.1 can be used to make a complete system for checking parallelism
of all three optical planes (film/CCD, lens, and copy). ZP3 is for those
who do not have ZV1 or ZV1.1.
ZP2 – a plate with
a ring module for checking parallelism of film/CCD standard-to-copy
without disassembling the camera. The plate contains a 4" square
mirror and a ring module and duplicates the weight effect of a Better
Light digital insert in a non-rigid copy system. The components of either
ZV1 or ZV1.1 can be used to make a complete system for checking parallelism
of all three optical planes (film/CCD, lens, and copy). ZP4 is for those
who do not have ZV1 or ZV1.1.
Lens replacements
ZL2 – a 21/2" long lens replacement
for enlarger lensboards. Outside threads are Leica (39mm); inside threads
are series #7 and hold either module. A ZL2 is practical and timesaving
when you have several lenses. Either a ZL2 or a ZL39 should be used
to replace (for alignment only) any lens without accessory threads as
well as the shorter Schneiders.
ZL39 & ZL50 – 1/2" long lens replacements
for enlargers to hold LED module only. They are shorter and more rigid
alternatives to ZL2. ZL39 fastens to Leica threads; ZL50 fastens to
two-inch lens board mounts and replaces (for alignment only) many lenses
longer than 150mm.
ZL
Drawings
This information brief requires Adobe Acrobat Reader. Click
here if you are not familiar with this program.
Lens board extension
ZL2X – a 31/2" extension with
Leica (39mm) threads with inside threads at one end and outside threads
at the other. Can be combined with the stand-alone ZL2 or ZL39.
Reducers
These reduce the diameter of the accessory threads of large lenses, so that
the LED module can be used at the lens of either vertical or horizontal
systems.
ZR8 – a #8-to-#7 indirect reducer. It holds an LED module
and usually requires a series #8 adapter for the lens.
ZR9 – a #9-to-#7 indirect reducer. It holds an LED module
and requires a series #9 adapter for the lens
ZR86 – an 86mm-to-#7 direct reducer. It holds an LED module
and is a common size for large lenses
ZR
Drawings
This information brief requires Adobe Acrobat Reader. Click
here if you are not familiar with this program.
Magnetic holder
ZM1 – a magnetic retainer for holding LED modules. It is
typically used on a steel wall for both horizontal copy or enlarging
setups.
ZM1
and Facts
This information brief requires Adobe Acrobat Reader. Click
here if you are not familiar with this program.
|